Myalarm V-LCD1 Instrukcja Obsługi Pobierz pdf (Strona 203)

PC/VDT PROGRAMMING - ADD/CHANGE KEYPAD CODES

9-197

System 2 Installation / Programming Manual

Door Schedules

As we discussed in the schedule section of this manual, schedules can be used to restrict the

access of users. You may, for example, want a user to be able to access the front door from

08:00 to 18:00, and access the back door from 17:00 to 23:00. On the other hand, you might

want a user to have 24-hour access to both doors. This is where you specify what you want.

The VDT will display the instructions

Use 0 thru 8

0=None

Door 01 Schedule [_0]

Note: If you have a two-door System 2 (2016), the amount of schedules available is 16.

At the Door 01 Schedule [ _ 0 ] prompt, specify the schedule number, if desired.

Entering a 0 means that this user will have 24-hour access to the door.

Example: If you programmed Schedule #1 - Cell #1 for an ON Time of 08:00 MTWTF and

Schedule #1 - Cell #2 an OFF Time of 18:00 MTWTF (you would have programmed schedules

back in option 3 - Program Schedules), and you assign Schedule #1 to this user, access will be

granted at 8:00 AM Monday - Friday and denied after 6:00 PM (18:00) Monday - Friday. Any

attempt to enter any other time will result in schedule error message.

If Schedule #1 also has holidays programmed into it, the person will be granted or denied

access during the holiday dates. This depends on whether the Holiday was programmed for ON

or OFF.

If you have multiple doors programmed for this user to access, simply repeat this process, when

prompted, for these doors. You will only be prompted for additional doors if this user has been

granted access to additional doors.

Use 0 thru 8

0=None

Door 02 Schedule [_0]

Simply repeat this process, when prompted, for additional doors.

If you only have a one door System 2, you are finished entering this user.

If you have a multi-door System 2, you can now program the Anti-Passback.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 335 336

Brak uwag

Myalarm V-LCD1 Instrukcja Obsługi Strona 203