Myalarm V-LCD1 Instrukcja Obsługi Pobierz pdf (Strona 167)

LCD PROGRAMMING - NETWORK OPTIONS

8-161

System 2 Installation / Programming Manual

Unit in Standalone Mode þþþþ

Enter Net Option [ 0 ]

Unit is a Master þþþþ

Enter Net Option [ 0 ]

1=Add Slave þþþþ

Enter Slave # [ 0 ]

Network Options (Option #18)

When you first powered up the unit, (back in the Initialization process) you made the decision to

either “Allow Networking”” or not.

If your System is a Stand-Alone unit (two doors) and you do not wish to program any of the

Network Options, press 0 and # (enter) to exit this option.

If your System is going to be used for networking multiple System 2's together, you can now

choose to make this particular unit a “Master” or a “Slave”. The Master unit has the capability

to program all System options.

The LCD will scroll:

Scrolling Options: 1=Convert to a Slave

2=Convert to a Master

3=Test RS485

0=Quit

At the Enter Net Option [ 0 ] prompt, make your selection.

Master Unit

If your unit is configured as a Master, and you enter or re-enter this option, the LCD will scroll:

Scrolling Options: 1=Convert to a Slave

2=Configure Network

3=Make Standalone

At the Enter Net Option [ 0 ] prompt, make your selection.

Configure Network

If you choose to configure the network, the LCD will scroll:

Scrolling Options: 2=Delete Slave

At the Enter Slave # [ 0 ] prompt, make your selection.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 335 336

Brak uwag

Myalarm V-LCD1 Instrukcja Obsługi Strona 167