Myalarm V-LCD1 Instrukcja Obsługi Pobierz pdf (Strona 193)

PC/VDT PROGRAMMING - PORT CONFIGURATION

9-187

System 2 Installation / Programming Manual

Selecting Any Card/Chip Mode

In this mode, any Corby Cards or Data Chips will activate any of the doors, regardless if the

card or chip is programmed into the unit. All someone needs is a Corby card or data chip and

the door can be accessed. This should only be used in minimal security applications where

security is not strictly enforced. In other words, this can be classified as an unlimited users

mode.

This should only be programmed if you desire the above outcome. Otherwise, skip over this

part of the program.

The VDT will display the following instructions:

WARNING!

This Mode Allows ANY

Card/Chip Access!

Press Any Key

The VDT will display the following instructions:

1=ANY Card/Chip Mode

2=Normal Mode

0=Quit

Select Mode [2]

You are given the opportunity to change your mind or verify your initial selection. If you select

2 “Normal Mode”, you will return on-line and the system will set the port to normal mode.

If you select 1 “ANY Card/Chip Mode” you will see the following prompt:

1=Yes,2=No

Are You Sure? [2]

After making your selection, you will return to the main menu.

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 335 336

Brak uwag

Myalarm V-LCD1 Instrukcja Obsługi Strona 193