Page 79
Set up Miscellaneous
To configure Miscellaneous items in the system, from the Set Up menu, press the 6 (MISC) key.
High Security Mode
In High Security Mode, the Master or Manager code is always required to do the following functions:
• Any Control functions
• Any Temperature Control
• View the Event Log
• Access the system from a local phone
With High Security Mode Off, no code is required to access a local telephone.
If your system is set up with High Security Mode On, the display will request the Master or Manager code whenever you select
one of these functions, even if the security system is Off. Simply enter your Master or Manager code.
Your system was shipped from the factory with High Security Mode Off, which allows you to view the event log and access the
local phones without having to enter a code. In most residential applications, this is appropriate. If you have a commercial
installation, or would like added protection from unauthorized access to the system, you may wish to turn on High Security Mode.
Announce Alarms
If a Two-Way Audio Module is being used in a system, this item enables the system to speak the type of alarm and zone over a
speaker on premises. When an alarm first occurs, the siren is activated. After a few seconds, the siren is turned off and the type
of alarm is announced. The siren is then reactivated.
The default for Announce Alarms is No.
Enable Freeze Alarm
If there are one or more Thermostat or PESM in a system, they can also be used to detect a freeze condition - See Freeze Alarm.
The default for Enabled Freeze Alarm is No.
Flash For Alarm
You may enter one unit number that will flash on and off continuously when the alarm is activated. This should be an outside
light to alert neighbors and police to your property if the alarm is activated.
The default Flash For Alarm is Unit 2. You may enter one number for the unit number you wish to have flash, or ' 0 ' for none.
Console 1-16 Audible Exit Delay
Consoles (and touchscreens) 1-16 can be configured to beep while the exit delay is in effect. During the last 10 seconds of the
exit delay, the audible indication will beep twice as fast to let you know that you must leave at once.
Press the 0 key to select “No” (this console will not beep during the exit delay) or the 1 key to select “Yes” (this console will beep
during the exit delay). After selecting, press the down-arrow key to change this option for the next console.
CONSOLE 1 AUD EXT: 1
0=NO 1=YES ↕
The default setting for Console 1-16 Audible Exit Delay is Yes.
(8 strony)
(362 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji