Myalarm V-LED1 Instrukcja Właściciela Pobierz pdf (Strona 27)

Page 18

When set to UPB, the OmniPro II controller can:

 Send commands (on, off, bright, dim and level) to individual switches and modules

 Receive commands and status from individual switches and modules

 Send commands to keypad controllers to change scenes and control LED backlight behind the keys

 Receive commands when buttons are pressed on keypad controllers to activate controller macros

 Send Link commands to switches, modules, and keypad controllers to activate scenes

 Receive Link commands when a button is pressed on a switch or on a keypad controller to activate controller macros

 Send “Status Request” messages to switches to update their status in the controller

 Receive the UPB Acknowledgement pulse that indicates that a switch has properly executed a command

LEVITON Lighting Control (HLC) Format

LEVITON Lighting Control (HLC) combines LEVITON UPB™ Wall Switches, Dimmers, and Modules, LEVITON UPB™

Room Controllers, and LEVITON UPB™ House Controllers to create lighting scenes that set the proper mood and ambiance for

various activities.

HLC format is a defined structure for configuring, programming, and operating all the HLC lighting devices in your home. Each

“House Code” that is configured to use the HLC format consists of 2 rooms with up to 8 HLC devices in each room. OmniPro II

supports up to 31 rooms of HLC lighting. OmniPro II can control up to 248 HLC devices.

LEVITON manufactured UPB™ devices (collectively referred to as HLC devices) can be configured using an Omni console or

OmniTouch touchscreen connected to the OmniPro II controller. Other UPB™ devices may be used in the HLC structure, but

cannot be configured using the OmniPro II controller; they must be configured using a PC running the UPB™ UPStart

configuration software – see Configuring HLC Devices.

About Rooms

Each “room” of HLC lighting consists of 8 consecutive unit numbers, starting at Unit 1 (i.e. Room 1 = Units 1-8, Room 2 = Units

9-16, Room 3 = Units 17-24, etc.). Each room can consist of a maximum of 8 HLC devices, configured as follows:

 Up to 7 LEVITON UPB™ Wall Switches, Dimmers, and/or Modules (for controlling up to 7 lighting loads in a room or

area)

 1 or more Room Controllers (set a scene in a room, turn the room on and off, and dim and brighten the room)

 1 House Controller (for controlling up to 8 rooms of HLC lighting)

 1 or more House Controllers (used as a general purpose 8 button keypad controllers)

The first unit number in each room (i.e. 1, 9, 17, 25, etc.) is reserved for controlling the room. The name for this unit should

reflect the room name (e.g. Kitchen, Great Room, Theater, etc.) HLC Wall Switches, Dimmers, or Modules cannot be

programmed to these unit numbers. If one or more Room Controllers are used, the first Room Controller should be set to the first

unit number in the group (i.e. Unit 1); additional Room Controllers can be used by setting each to any other unused unit number

in the group (i.e. Units 2-8).

About Room Controllers

The LEVITON UPB™ 6-Button Room Controller allows for lighting control of a room where LEVITON UPB™ Wall Switches,

Dimmers, and Modules have been installed. From a Room Controller the room can be turned off (all loads in the group are turned

off), turned on (all loads in the group are turned on), brightened (all loads are brightened from their current level), dimmed (all

loads are dimmed from their current level), or set to one of 4 lighting scenes (A-D).

Room Controller LED Indicators

When the room is turned on, the LED indicator behind the “On” button is illuminated and all others are turned off. When the

room is turned off, the LED indicator behind the “Off” button is illuminated and all others are turned off. When the room is

brightened, the LED indicator behind the “On” is illuminated and all others are turned off. When the room is dimmed, the LED

indicator that is currently illuminated stays on. When the room is set to a lighting scene (A-D), the LED indicator behind the

respective scene letter is illuminated and all others are turned off.

WEB VERSION

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 123 124

WEB VERSION 1

Komentarze do niniejszej Instrukcji

Brak uwag

Myalarm V-LED1 Instrukcja Właściciela Strona 27

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Myalarm V-LED1