Myalarm V-LED1 Informacje Techniczne Strona 9

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 11
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 8
Each user PIN must be assigned a two digit authorization level:
01 All system operation and programming
02 All system operation and programming, except PIN programming
03 System operation only, no programming
04 System arming only, no disarming, bypassing, or programming
PIN Authorization Levels
[2] Temporary PIN (automatically cancelling) 2 +
User PIN 08 can be programmed to automatically expire. Set the PINs duration (in days)
here. Select a value between 01 and 98 days; or, 99 for a permanent PIN.
User PIN 01 cannot be erased and must have Authority level 01
If you continue, Vision will automatically advance to the address of the next PIN and wait for
a four digit code + + two digit autorization level , etc..and automatically return to
Home of User Programming after the eigth user PIN is programmed. At any time, can
be pressed once to return to Home of User Programming; press a second time to
return to system-wide Home.
#
Clear
#
Clear
NoteNote
NoteNote
Note
[3] Utility PIN 3 +
User If your system is equipped to operate auxilliary equipment (such as an electronic or
magnetic door lock), the code used to activate this feature can be programmed here.
During the sequence shown above, when you are requested to enter a 4 digit PIN number,
you can change a PIN number by entering the new 4 digit PIN over the old PIN. To delete a
PIN number, press instead of entering a 4 digit code. Proceed to press and set a
Authorization Level to finish the programming sequence.
Changing/Deleting User PINs
9
Complete sequence to program a User PIN
+ 8 + PIN + 1 + + PIN address (02, 03, 04, etc...) + + New 4 digit code +
+ 2 digit Authorization Level +
(#, # to exit programming)
Complete sequence to set duration of temporary PIN
+ 8 + PIN + 2 + + days +
(#, # to exit programming)
Complete sequence to program the Utility PIN
+ 8 + PIN + 3 + + 4 digit PIN +
(#, # to exit programming)
Przeglądanie stron 8
1 2 3 4 5 6 7 8 9 10 11

Komentarze do niniejszej Instrukcji

Brak uwag