Myalarm V-LCD1 Informacje Techniczne Pobierz pdf (Strona 4)

System Operation

- Arm without entry delay: press + during Exit Delay period.

- Arm without exit delay: press +

during Exit Delay period.

- Your entire security system can be turned on by pressing the button for

approximately two seconds.

- A PIN number can be required before pressing to turn on the system.

Ask your security company if you would like this feature activated.

Additional Arming Options

Utility

The green ‘Ready’ light indicates that all detectors are secure and ready to arm.

If the ‘Ready’ light is not on, one or more detectors are activating (open) and are

not ready to be armed. Depending on your system’s design, this may or

may not prevent your system from arming. Vision’s Zone Indicator lights

display which zone(s) have detectors which are in alarm (or open). Check

the detector(s) on the zone(s) and arm your system. If you are ub3cle to

reset the detectors and return to ‘Ready’ mode, call your security company

for assistance.

After pressing to begin arming, keypads will beep slowly during the exit

delay period (if applicacle). The tempo increases for the last ten seconds

of the exit delay period and a sustained tone indicates that the delay period

has expired and arming is now complete. After the arming process has

been initiated, a valid user PIN must be entered to cancel arming.

1 2 3 4 5 6 7 8 9 10 11

Brak uwag

Myalarm V-LCD1 Informacje Techniczne Strona 4